posted
I am getting the message: Y motor tracking error. Can anyone tell me what this means. I seem to be unable to center a design and proceed. Thank you in advance!
-------------------- Debbie in Arizona Posts: 80 | From: Arizona | Registered: Oct 2009
| IP: Logged |
posted
I get the same issue but unfortunately I haven't been able to track down a solution.
Posts: 8 | From: West Grove, PA | Registered: Dec 2006
| IP: Logged |
posted
Debbie....Ted here from MO. Sometime back I had a call where the customer was getting the same message and the Y motor was changed by another tech so I knew that wasn't the problem. I moved the beam around with the estop button pushed in and it seemed a little draggy so I oiled the Y rails and it seemed to be ok from that time on.
Posts: 48 | From: Doe Run, MO | Registered: Oct 2008
| IP: Logged |
Printer-friendly view of this topic