posted
Jackie, I use OESCO font on the back of caps if I can as it will sew nice even at .15 size. How big depends on the style of cap ( fitted or adjustable) and how many letters you need to put there.
Cindy
Posts: 147 | From: 735 W. Briles Phoenix, AZ | Registered: Oct 2006
| IP: Logged |
posted
I have been using MICRO BLK CP and can go as small as .18 and have good results. Cindy is right it depends on haw many letters you have. Good Luck!
posted
I usually will not go over 1/2" but keep it mainly about .35 in height. I use several fonts and try and keep it the same font as the front if there is text in the front.
posted
We hoop them with a slimline or fast frame circular. With the fast frame I use sticky backing and with the slimline I just use a tear away. Margaret
-------------------- Wishes In Stitches Embroidery 4502 W. Buffalo Street Chandler, Arizona 85226 480-216-3163 Posts: 290 | From: Arizona | Registered: May 2006
| IP: Logged |
posted
I use a 12cm hoop and use the corner of my desk to position the cap and hoop.
Posts: 13 | From: Newcastle, OK | Registered: Aug 2009
| IP: Logged |
Printer-friendly view of this topic