Announcement

Collapse
No announcement yet.

head timing problem?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • head timing problem?

    hi, i have XTS, during the design sawing thread was jammed in the bobbin assembly, mashine did noise, stoped and i can see that bobbin assembly is not on correct position and moving around as it was desplaced. what to do?
    Thanks
    Elena

  • #2
    Look in the Technical Manual under Rotary Hook Timing; that's what the bobbin assembly is called. Why did the thread become so jammed into the rotary hook that it threw the timing off? Something sounds very wrong.

    Comment

    Working...
    X