Quantcast Really Boogered up machine

news

discussion boards mailing list tips / tricks / forms designs suppliers find a shop marketplace
News
  archives

Discussion
  main menu

Suppliers
  apparel
 
hats
 
thread
  backing
  hoops / hooping
  stock designs

Tips & Tricks
  main menu

Mailing List
  sign up now
 
my account

Amaya Shops
  locate a shop

Marketplace
  shop for supplies

Resources
  official Melco site
  online resources

 

Help Support This Site:


 


 

Results 1 to 1 of 1
  1. #1
    Join Date
    Jan 2018
    Posts
    17
    Post Thanks / Like

    Really Boogered up machine

    Good Morning everyone,
    I am kinda desperate. There are no techs close and I have 5 hoodies, 4 pair of jeans a couple of hats and 20 patches to do by Tuesday. ANY help you can offer would be deeply appreciated.

    My machine is breaking the top thread every time it gets up to speed. When I pull the hoop off and check the back of the hoop, there is a mess of thread that can simply be pulled out. The bobbin is not catching.

    My machine problems all started last week when I stupidly started the machine after a thread break. I had turned the machine off with the red button, threaded the needle and forgot to move the carriage back before turning it back on and hitting the green button. Immediately it hit the hoop broke the needle and boogered up there machine again.

    It dropped the needle bar and locked the needle case. When my son got home he took it apart and found I had broken the reciprocator. So we ordered one and replaced it. He and I installed the needle case. I did the rough and the fine calibration. The machine acted like it wasn't picking up the bobbin thread so I checked needle orientation. Tweaked it every so slightly. Tried again. It would sew out the 3-4 beginning slow stitches but as soon as it got to sewing at speed it broke the upper thread and created a bird nest underneath. I checked bobbin tension again and got yet another bobbin. Same.

    I have checked the hook timing and set the hook timing (which was way off) and checked for clearance in front and behind the needle in specs. I went back again and checked the needle case calibration, it was good. Cleaned the bobbin case and installed another new bobbin! SAME THING.

    I moved to the needle with hot pink thread so I could see what was going on. See pics attached of front and side view
    Last edited by ChicksRide2; 02-02-2020 at 04:59 PM. Reason: update and clarify

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
  a Levelbest Network Site - 2013

This site is not owned by or affiliated with Melco or any companies or subsidiaries.