Stitching issues

[crossthread]

All of a sudden my machine is breaking threads and the bobbin thread is
showing on top. Does not matter what needle I am on, it is doing it on all.
I have done the following:
Oiled
Changed threads
Changed needles
Cleaned the presser foot area
Changed bobbin
Adjusted bobbin in spool, did the bounce test
Ran in manual and automatic.
Does not matter what material I am stitching on, it is doing it on
all stitching.

Is something out of calibration?

My other machine is running fine (I have 2- Amaya XT's)

Any help would be greatly appreciated. The only thing I can do right now
is shut it off!

Thank you,

[Juli in Kona]

Did you check that your bobbin is in facing the right way? Your problem is in the bobbin area (not the needles).

[crossthread]

Hi Juli, Yes, I made sure the bobbin was in correctly. I also cleaned it and cleaned under the feeder etc. I had originally thought it was my design but I am running a design I have always used. It runs ok on my other machine. Just very frustrating.... Thank you for your help. I will keep looking.

[Rod or Sharon]

Hi Pam!

How are things going? First check your hook timing and presser foot height. Next we need to know what settings you are using and what are you sewing?

Sharon Springer

[crossthread]

Hi Sharon,
Still no luck... do you know the next step?

How do you check the hook timing? I not sure how to do this?

Thank you for your help in what ever you can think of. I am lost and of course have work to do.
Thank you,