Announcement

Collapse
No announcement yet.

Split Front Applique on Baseball Jersey

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Split Front Applique on Baseball Jersey

    I'm attempting my first split front overlap on a jersey. I have the first side hooped and realized I can't line it up properly due to the center feature. Is there a way to turn this off?
    Janet

  • #2
    I'm not sure what you're asking. The center feature just moves the pantograph to the center point of the selected hoop size when a design is loaded. If this isn't exactly where the center of the design you want to embroider is located, just move the pantograph using the keypad to the desired location, go to Maintenance and do a Bottom Center to make sure the needle is exactly where you want it to be, check your horizontal and vertical alignment if you have these lines digitized, then do a trace to make sure you haven't moved outside your hoop limits. You should be ready to go. The only other thing I might recommend is that you write down the x and y location of your new center point in case something goes wrong and you need to know where you began.

    Comment

    Working...
    X